CATEGORIES
- DU - PTFE coated bush
- DX - POM coated Bush
- FB090 - Bronze Bushing
- FB092 - Bronze Bushing
- JF - Bimetal Bearing
- JDB - Cast bronze bearing
- Ball Cage Retainer
- GSB - Guide slide bearing
- FU - Oil sintered bearing
- BTU - Ball transfer unit
- SPB - Spherical Plain Bearing
- COM fabric phenolic series
- Fill the modified fluorine plast
- Hydraulic seal series
Latest news
- FB090/FB092 Wrapped Bronze Bearings
- Shock Absorber Upper & Lower Bush
- Hollow Shaft Magnetic Ferrofluid Vacuu
- Bronze Sliding Du Bush Bearing, Bronze
- Magnetic Ferrofluid Vacuum Sealing Fee
- Metal-polymer,Low Friction,Plain Beari
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan
- TEL: 86-731-84770165
- FAX: 86-731-84770163
- E-mail: sales4@@slide-bearing.com
> FB090 - Bronze Bushing
WF-WB700 Flanged Bushing
- Hardness :HB90-HB125
- Yield point: 250 N/mm2
- Tensile strength:450 N/mm2
- Maximum Dynamic Load:40 N/mm2
- Product description: WF-WB700 Flanged Bushing is a kind of slide bearing in split wrapped bushing. It is made of CuSn6.5 or CuSm.The bronze is made as the particular formulation with high specific and gravity.
PRODUCT INTRODUCTION
►Possible Applications:
Industrial: Widely used in construction machinery, agricultural machinery and so on.
►Advantages:
1. Lead-free and fully recyclable. Less expensive than machined bushing.
2. Minimal space required.
3. Lighter in weight than machined bushing or roller bearing.
4. High stability under load, therefore particularly suitable for oscillating bearing.
5. Lubrication grooves are coined into the metal, and any shape desired is possible.
6. Grease depots for long-term lubrication.
►Flanged bushing offer the following additional advantages:
1. A single bushing and take both radial and axial forces.
2. A single bearing element is needed to replace both thrust washer and cylindrical bushing.
3. High stability.
4. No fixing of thrust washers.
1. Material
Chemical Composition (%)
Type
CuSn8P
Cu = 91.3% Sn = 8.5% P =0.2%
Lead Free
CuPb10Sn10
Cu = Balance. Sn = 9~11%, Pb=9~11%
With Lead
2. With diamond oil pocket
3. Lead-free & Low-maintenance
4. Hardness HB90-HB125
►Physical and Mechanical Properties:
Maximum Operating Temperature Tmax
200
°C
Minimum Operating Temperature Tmin
-80
°C
Maximum Static Load Psta,max
120
N/mm2
Maximum Dynamic Load Pdyn,max
40
N/mm2
Maximum Sliding Speed V
2.5
m/s
RELATED PRODUCTS
-
WB700 Bronze Bushing
WB700 is a kind of bushes wrapped by bronze strip. The bronze ...
-
WB800 Harden Bronze Bush
WB800 harden bronze bushing in hardness HB125-HB150, is made o...
-
WF-WB800 Harden Flanged
WF-WB800 Harden Flanged Bushing is made from CuSn6.5 or CuSn8,...