Hunan
Jintai Hardware and Machinery Co., Ltd tells us that the structure of
the bearing self-smoothing bearing is developed on the metal clash
surface of the bearing base with an orderly size and appropriate hole,
and embedded in molybdenum disulfide, graphite, etc. made of composite
self-smooth The
block is embedded in the metal sleeve and the composite bearing is made.
The solid smoothing agent has a friction area of 25-65%. Solids from the optical slider can work normally at a high temperature of 280°C. However, due to its low mechanical strength, the bearing
capacity is weak, and it is prone to deformation, and it can be pressed
into the metal hole groove to press this flaw, forming a metal part to
bear the role of smooth play from the light slider.
The
smooth mechanism of this self-smooth bearing is that during the sliding
conflict between the shaft and the sleeve, a part of the self-smooth
data molecule is transferred to the metal surface of the shaft, filling
the small non-planar surface, and forming a relatively stable solid
smooth film. The formation of a solid smooth film between the wear, to prevent the shaft and sleeve adhesive wear. This
rational link sums up the respective complementary strengths of the
copper alloy and non-metallic wear reduction data, and is particularly
suitable for oil-free, high-temperature, high-load, low-velocity,
anti-fouling, corrosion-resistant, and strong radiation environments,
and It is applied
under special working conditions in which water or other solutions are
infiltrated and the base is not able to add smooth grease.
CATEGORIES
Latest news
- FB090/FB092 Wrapped Bronze Bearings
- Shock Absorber Upper & Lower Bush
- Hollow Shaft Magnetic Ferrofluid Vacuu
- Bronze Sliding Du Bush Bearing, Bronze
- Magnetic Ferrofluid Vacuum Sealing Fee
- Metal-polymer,Low Friction,Plain Beari
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan
- TEL: 86-731-84770165
- FAX: 86-731-84770163
- E-mail: sales4@@slide-bearing.com
> Company news