CATEGORIES
- DU - PTFE coated bush
- DX - POM coated Bush
- FB090 - Bronze Bushing
- FB092 - Bronze Bushing
- JF - Bimetal Bearing
- JDB - Cast bronze bearing
- Ball Cage Retainer
- GSB - Guide slide bearing
- FU - Oil sintered bearing
- BTU - Ball transfer unit
- SPB - Spherical Plain Bearing
- COM fabric phenolic series
- Fill the modified fluorine plast
- Hydraulic seal series
Latest news
- FB090/FB092 Wrapped Bronze Bearings
- Shock Absorber Upper & Lower Bush
- Hollow Shaft Magnetic Ferrofluid Vacuu
- Bronze Sliding Du Bush Bearing, Bronze
- Magnetic Ferrofluid Vacuum Sealing Fee
- Metal-polymer,Low Friction,Plain Beari
Contact us
- ADD: No.503,Hunan International Commerce Center, Jintai Square,Changsha 410001,Hunan
- TEL: 86-731-84770165
- FAX: 86-731-84770163
- E-mail: sales4@@slide-bearing.com
> FB092 - Bronze Bushing
WB802 Harden Bronze Bushing
- Hardness:125-150 HB
- Yield point:300 N/mm2
- Tensile strenght:450 N/mm2
- Maximum Dynamic Load:40 N/mm2
- Product description: WB802 Harden Bronze Bushings is made of CuSn6.5 or CuSn8 in hardness of HB125 - HB150. IIt is suitable for heavy loading duty when the spindle is also hard.
PRODUCT INTRODUCTION
1. Lead-free and fully recyclable. Less expensive than machined bushing.
2. Minimal space required.
3. Lighter in weight than machined bushing or roller bearing.
4. High stability under load, therefore particularly suitable for oscillating bearing.
5. Lubrication grooves are coined into the metal, and any shape desired is possible.
6. Grease depots for long-term lubrication.
►Flanged bushing offer the following additional advantages:
1. A single bushing and take both radial and axial forces.
2. A single bearing element is needed to replace both thrust washer and cylindrical bushing.
3. High stability.
4. No fixing of thrust washers.
● Descriptions
1. Material
Chemical Composition (%)
Type
CuSn8P
Cu = 91.3% Sn = 8.5% P =0.2%
Lead Free
CuPb10Sn10
Cu = Balance. Sn = 9~11%, Pb=9~11%
With Lead
2. With round oil holes
3. Lead-free & Low-maintenance
● Features
1. WB802 is based on high density bronze alloy, and rolled with diamond pocket or round pocket as it's inner surface.
2. It has high capacity, high temperature, anti-corrosion and good wear.
3. Hardness HD125-HB150
● Possible Applications
Industrial: Widely used in construction machinery, agricultural machinery and so on.
■ Physical and Mechanical Properties
Maximum Operating Temperature Tmax
200
°C
Minimum Operating Temperature Tmin
-100
°C
Maximum Static Load Psta,max
280
N/mm2
Maximum Dynamic Load Pdyn,max
40
N/mm2
Maximum Sliding Speed V
2.5
m/s
RELATED PRODUCTS
-
WB702 Bronze Bushing
WB700 is a kind of bushes wrapped by bronze strip. The bronze ...
-
WF-WB702 Flanged Bushing
WF-WB702 Flanged Bushing is made from CuSn6.5 bronze with oil ...
-
WF-WB802 Harden Flanged
WF-WB802 Harden Flanged Bushing is made of CuSn8 in hardness o...